The RLH Ultra PoE++ Ethernet Media Converter is a rugged, full featured media converter. It converts copper Ethernet to fiber, and may be used to extend a copper Ethernet network up to 62 miles (100km) over fiber optic cable.

The integrated PoE++ power over Ethernet feature provides up to 90 Watts of power to a single end device and follows the IEEE 802.3bt standard. The integrated PoE Remote Reset (PRR) feature allows this device to reset a PoE powered device on Fiber Link failure. When the fiber is disconnected on the local device it will cause the PoE output power to drop at the remote device when the PRR feature is enabled.

This system is designed to transport critical communications where reliability is paramount. It is environmentally hardened to operate over a wide temperature range and is standards compliant ensuring compatibility with existing network devices.

Additional Features include link fault pass thru, dual rate SFP slot, a small footprint, and mounting options including both T-35 DIN rail and wall mounting ears.

EGD-POE-BT-4

• Wide operating temperature range -40°F to +167°F (-40°C to +75°C)
• Dual Rate SFP Port – 100Mbps & 1Gbps
• Ultra PoE++ port with up to 90 Watts output
• IEEE 802.3bt standard
• IEEE 802.1q VLAN traffic pass through
• Link Fault Pass through
• PoE Remote Reset
• Redundant power inputs
• Rugged case rated to IP30
• DIN rail & wall mountable

Please see the product Data Sheet for the complete list of specifications

Construction:
Powder coated IP30 steel housing

Ethernet Ports:
(1) 10/100/1000 PoE++ 802.3bt

SFP Port:
(1) Dual Rate SFP Port – Accepts 100 or 1000 speed SFP Modules

Ethernet Interface:
Auto MDI/MDI-X, Auto Negotiation

PoE Powering:
90 Watts
IEEE 802.3af/at/bt (Supports Mode A, Mode B, 4-Pair Mode)
PoE Type 4

Mounting Style:
Standard DIN rail (TS-35) or wall mount
Wall mount brackets included

Dimensions:
1.18” (W) x 2.95” (D) x 3.74” (H), (30mm x 75mm x 95mm)
Not including connectors or DIN bracket

Operating Temperature:
-40°F to 167°F (-40°C to 75°C)

Powering Requirement:
48~55VDC redundant power inputs