All
DC/DC Converter - 1RU Rack Mount (legacy)
DC/DC 19" rack mount converters for industrial telecom applications provide an isolated and regulated DC output.
Wall Mount 19 inch Rack Mount Bracket (legacy)
The RLH Wall Mount 19” 2RU Rack bracket simplifies the mounting of EIA 19” rack equipment to a wall or panel.
Rack Mount Cable Managers (legacy)
Horizontal cable management products are extruded from high grade polymers and fit on a standard 19” rack.
4 Channel 4~20mA / 0~10VDC (legacy)
The 4 Channel 4~20mA / 0~10VDC System transmits 4 independent analog signals over a single fiber.
5 Card Mini Interface Unit (legacy)
The Mini Interface Unit is a durable, fiberglass dielectric cabinet for outdoor installation of Fiber Link Cards.
Pedestal Mounting Pad/Base (legacy)
The pedestal mounting base provides added stability, and expanded cable storage for the RLH Hi-Density Pedestal.
High-Density Pedestal (legacy)
Offers a convenient solution for a Fiber Optic Link CO Side location with high circuit count.
Aluminum Telco Interface Units (legacy)
These NEMA 4 aluminum units may be used in both indoor and extreme outdoor environments.
10W 12V Solar Power Supply (legacy)
A power supply system - 10W 12VDC solar panel with 7AH regulated battery pack and charge controller.
40W 24V Solar Power Supply (legacy)
A power supply system - 40W 24VDC solar panel with 20AH regulated battery pack and charge controller.
75W 24V Solar Power Supply (legacy)
A power supply system - 75W 24VDC solar panel with 52AH regulated battery pack and charge controller.
150W 24V Solar Power Supply (legacy)
The RLH 150W solar power supply is a fully integrated solution provide remote powering for industrial equipment.
300W 48V Solar Power Supply (legacy)
The RLH 300W solar power supply is a fully integrated solution provide remote powering for industrial equipment.
RS-232 (legacy)
The RS-232 Serial Data Fiber Link Card transmits a copper 9 PIN RS-232 signal over fiber.
4 Wire Data with E&M (legacy)
The 4 Wire Analog Data fiber link card transmits a 600 Ohm voice frequency signal with E&M over fiber.
Dual Card Indoor Housing (legacy)
The RLH Indoor Dual Fiber Link Card Housing is designed to hold (2) Fiber Optic Link Cards.
Gigabit Ethernet Media Converter (legacy)
The Gigabit Ethernet Media Converter extends Gigabit Ethernet up to 74 miles over fiber.
iMux Multiplexer System (legacy)
The RLH iMux Multiplexor System Transports POTS, 4W AUDIO DATA, RS-232, T1, & Fast Ethernet over one Fiber.
Optimum 4RU Fiber Patch Panel (legacy)
The Optimum 4RU Rack Mount Patch Panel supports up to 192 fibers, 8 splice trays, and 2 dual cable strain relief kits.
Galvanized Steel Telco Cabinets (legacy)
These NEMA 4 steel units may be used in both indoor and extreme outdoor environments.
Galvanized Steel Cabinets (legacy)
RLH galvanized steel cabinets provide long-lasting, weatherproof protection for housing equipment.
Fiberglass Cabinets (& Telco Interface Units) (legacy)
For general applications and where the CO side Fiber Optic Link equipment is located inside a high voltage area.
Telco Turnkey Unit (legacy)
Preconfgured cabinets and pedestals that offer a fast and convenient way to set up a Fiber Optic Link systems.
Mode Conditioning (legacy)
Mode Conditioning Cables are used to launch single mode transceivers over Multi-Mode fiber and are typically used in pairs.
AC/DC 48V Wall Mount Power Supply (legacy)
The AC/DC Hi-Density Power Supply is an isolated 48 VDC power source and is NEBS Level 3 approved.
Line Powered DC Supply (legacy)
Line powered DC supplies are telco line power converters that provide a remote power source over twisted pair.
Line Powered DC Supply (legacy)
The line powered DC supply provides a remote power source over twisted pair for outside plant telecom equipment.
Pull Boxes (legacy)
High Density Polyethylene grade level pull boxes for storing and accessing fiber optic cable slack underground.
Fiber Cleaning Kit (legacy)
A fiber cleaning kit in a convenient carrying case as well as 1-click cleaners to easily clean connectors.
One-Click Cleaners (legacy)
2.5mm and the 1.25mm 1-click cleaners for to easily clean connectors and adapters before connection.
Fiberglass Solar Panel Mounting Pole (legacy)
Filament wound, tapered composite shaft contains access panels, conduit elbows and connectors, caps and clamps.
