Ethernet IO

The Smart Relay Output is an Ethernet device with 8 Integrated controllable relays. The device allows for web based control of the relays and may be integrated into distributed control and network management systems to allow those systems to control its Relays. Each of the Relays can be individually configured to send customized emails and notifications when an event is triggered. The device supports a wide variety of protocols it is compatible with over Ethernet. Integration options supported are: SNMP Polling and Traps, Modbus TCP featuring addressable registers, and DNPv3 TCP for integration with utility and other automation control systems.

Contact Closure Over Ethernet

The RLH Smart Relay Output may be paired with an RLH Smart Input Sensor. When using RLH’s System Link feature, the two devices become linked establishing a tunnel over an Ethernet network and will transport a digital outputs being received by the Input Sensor through the Ethernet tunnel to the linked Relay Output device. The System Link feature can be set up via: One to One, Many to One, and One to Many allowing for event distribution and consolidation as needed.

View the matching Smart Input Sensor

SM-OUTPUT-NO-2
SM-OUTPUT-NC-2
SM-OUTPUT-OC-2

• Rugged Design – Operating temperature, -40°C ~ 70°C
• Intuitive embedded web interface for configuration
• 8 Relay Outputs for initiating alarms or actions though one of it’s integrated protocols
• Supports SNMP 1, 2c, 3, & SNMP Traps 1, 2c
• Supports DNP 3.0 over Ethernet
• Supports Modbus over Ethernet
• Use the System Link feature to Pair this device with a input sensor device for alarm transportation over Ethernet
• Event Consolidation, Send alarms from up to 8 locations to 1 Relay Output device
• Email alarms for the Outputs are customizable to your application
• Advanced SMTP integration allowing for SSL and TLS based authentication
• Event log with time stamps
• Relays can support up to 60 watts for most voltages
• System power ranges available: 24-48VDC or 125VDC
• 10/100 Fast Ethernet Port
• Limited Lifetime Warranty
• Made in USA

Powering Voltage:
Standard Model – 24-48VDC
-A Model – 125VDC
-B Model – 12VDC

Power Consumption:
6 Watts (Maximum)

Protocols Supported:
DNP 3.0 TCP, Modbus TCP, SNMP Polling 1,2c,3, SNMP Traps 1, 2c, SMTP w/ TLS Authentication

System Link Response Time:
Typical 8ms, Maximum 45ms

*Specifications listed are based on direct connections. Network overhead should be considered when calculating overall system response times.

Data Interface:
Ethernet (RJ-45)

Data Rate:
Fast Ethernet 10/100Mbps

Inputs 1~8:
SM-OUTPUT-NO-2 – Normally Open Relays
SM-OUTPUT-NC-2 – Normally Closed Relays
SM-OUTPUT-OC-2 – Relays 1-4 Normally Open / Relays 5-8 Normally Closed

Relay Maximum Ratings:
115VAC / 1.08A / 125VA
12VDC / 3.00A / 36 Watts
24VDC / 2.50A / 60 Watts
48VDC / 1.25A / 60 Watts
130VDC / 0.46A / 60 Watts
220VDC / 0.27A / 60 Watts

LED:
POWER – DC Power OK
SYS – CPU OK
LNK – System Link ON/OFF Status
Outputs – ON/OFF Status

System Alarm Output:
NO/NC Relay

Surge Protection:
Varistors & Automatic resettable fuses
DC Input Isolation 1.5kV
Voltage Reversal Protection

Construction:
Powder coated steel and aluminum alloy
Physical Dimensions H 5.0” x W 2.0” x D 3.9” (127mm x 51mm x 100mm)

Mounting Style:
Standard DIN rail (T-35)

Operating:
Temperature -40°F to +158°F (-40°C to +70°C)
Humidity 95%
MTBF 175,000 Hrs. (Circuit Board level)