Extend MPLS, PRI, or DATA T1 Circuits Over Fiber – Line Powered

Fiber Link Card Icon

Temperature Icon

T1/E1 Compatible IconCO Line Powered Icon

NEBS 3 IconUL Listed Icon

Request a Quote
Features
  • 100 kHz to 10 MHz T-1
  • 1.544 Mbps or CCIT 2.084 Mbps
  • European E1 compatible
  • LED Status monitoring
  • Dual power capable, line or 24-56VDC
  • Available in Singlemode or Multimode
  • Available with ST or SC Connectors
  • Available with RJ 48C Adapters
  • Compatible with wide variety of housings
  • Limited Lifetime Warranty

  • Made in USA
Overview

NEBS Level 3The RLH 4 Wire T1/E1 NEBS fiber link card processes incoming bipolar signals (9.0V P-P Max) within a bandwidth of 100 KHz to 10 MHz T-1 (1.544Mbps) or (CCITT 2.048MbpS), optically transmits these signals via fiber optic cable, and converts the signal to the original electrical signal with minimal gain or loss.

Output to the copper line is automatically maintained at a nominal level. Transient voltages appearing on or between the 4-wire pairs and/or power supply input are limited by thermistors, gas tubes and MOVs. Informative LED indicators for status monitoring are built into the card. This Model 2 system is also compatible with the Model 1 card.

This fiber link card is designed to be installed into any of the RLH fiber link card housings, and occupies a single card slot.

Specifications

For a comprehensive review of the product specs, please see the Data Sheet, or feel free to contact us with any questions.


Transmission Method:
Frequency modulated light via two optical fibers


Wavelength:
Multimode: 850nm
Singlemode: 1310nm


Fiber Type/Distance:
Multimode 1.5 miles/2.5km
Singlemode 9 miles/15km
Long Haul 37 miles/60km


Fiber Connector Type:
ST or SC


Dimensions:
7in. x 4in. x 1in. (177.8mm x 101.6mm x 25.4mm)
(Standard RLH Fiber Link Card Form Factor)


Operating Temperature:
-40˚F to +158˚F (-40˚C to +70˚C)


Operating Humidity:
95% non-condensing


Standards Compliance:
FCC PART-68B
IEEE-487, IEEE-1590
BR 876-310-100 BT (Telcordia)
Bellcore SR-3966, Motorola R56
GR-1089, GR-63
ANSI T1.403
NEBS Level 3

Diagrams
4 Wire T1/E1 – NEBS System

4 Wire T1/E1 – NEBS System

Downloads

Download the RLH Data Sheet

Download the RLH User Guide

Download the Product Information

Download the Layout

Download the RLH Visio Stencil

Download the RLH DXF File

Download the DXF File

Ordering
  • A complete system requires a CO card and a SUB card
  • Add -RJ to the part number for pre-installed RJ-48C adapter
  • This card is designed to be installed into a Card Housing

Please submit a quote request or contact your RLH sales representative for pricing and delivery information.

Numbers

8806-1315-02
8806-1325-02
8805-1315-02
8805-1325-02
8806-1300-02
8806-1310-02
8805-1300-02
8805-1310-02
8806-1300-02-LH
8806-1310-02-LH
8805-1300-02-LH
8805-1310-02-LH
RLH-RJT1-CO
RLH-RJT1-SUB