Compact Ethernet Over Fiber Solution

Temperature Icon

Ethernet Icon

DIN Icon

Request a Quote
Features
  • Compact, Slim, low cost Ethernet data over fiber solution
  • Available with ST, SC or FC connectors
  • Available in Single or Multi-mode fiber, up to 74.5mi /120km fiber range
  • Auto sensing for 10/100 Mbps speeds on copper Ethernet connections
  • IEEE 802.3, IEEE 802.3x, IEEE 802.3u compliant
  • IEEE802.3x compliant for full-duplex, back pressure flow control for half-duplex
  • Provides 801.1q pass-thru
  • Eliminates EMI, RFI, cross talk or ground loop issues
  • Convenient LED Status monitoring
  • Powering requires 12~36VDC 2A power supply
  • Built-in surge, static and circuit protection
Overview

The RLH 10/100 Ethernet DIN Fiber Link system is a rugged, full featured media converter. It converts copper Ethernet to fiber, and may be used to extend a copper Ethernet network up to 74 miles (120km) over fiber optic cable.

The RLH SlimLine DIN 10/100M Ethernet Over Fiber system is a multifunction converter that supports Ethernet communications over fiber optic cable. Fiber optics not only provide the long distance Ethernet transmission capability up to 74.5 Miles (120km), but also provide immunity to EMI/RFI and transient surges. They are ideal for data communications near large electrical equipment or where radio interference can be an issue.

The slim DIN housing requires only 32mm of DIN rail space for mounting.

It requires a local 12~36VDC power supply that connects via a power terminal on the bottom. DIN rail power supplies are available to power the SlimLine converter from AC or DC mains.

Specifications

Transmission Method:
Frequency modulated light via two optical fibers


Wavelength:
Multimode: 1310nm
Singlemode: 1310nm/1550nm


Fiber Type Distance:
Multimode (62.5/125µm & 50/125µm): 1.2 miles/2km
Singlemode (9/125µm): up to 24.8mi /40km, 37mi / 60km, and 74.5mi / 120km


Fiber Connector Type:
ST, SC, or FC


Dimensions:
H4.1” x W1.3” x D3.1” (103mm x 32mm x 78mm) not including DIN mount bracket


Power Requirements:
12~36VDC 1A via screw-down connector on bottom

Downloads

Download the User Guide

Download the RLH DXF File

Download the DXF File

Ordering
  • Bidirectional single fiber models require an A side and B side unit for a complete system

Please submit a quote request or contact your RLH sales representative for pricing and delivery information.

Numbers

RLH-ES2-04-1
RLH-ES2-03-1
RLH-ES2-50-1
RLH-ES2-51-1
RLH-ES2-55-1
RLH-ES2-40-1
RLH-ES2-41-1
RLH-ES2-45-1
RLH-ES2-10-1
RLH-ES2-11-1
RLH-ES2-14-1
RLH-ES2-15-1