PRODUCT DESCRIPTION
RLH Industries, Inc. manufactures fiber optic cable assemblies. Fiber optic cables assemblies can easily be installed with little or no fiber experience. Pre-terminated fiber provides a convenient and cost effective engineering solution. Fiber optic strand counts from 2 to 156 can be pre-terminated.
Note: Strand counts higher than 96 are at risk of damage during installation and should be field terminated after cable is installed.
RLH cable assemblies can include a pulling sheath installed on one or both ends of the cable. The pulling sheath protects the terminated ends during installation and has a Kevlar pulling eye rated at 600 lbs. Recommended conduit size for pullng fiber cable with a pulling sheath is 2-4 inches.
When measuring the length of the fiber path it is recommended to add 20-50 feet of slack for maintenance. Cable slack can usually be stored in a pull box or hand hole. RLH breakout kits come with standard 3 feet of 3mm buffer tubing (unless otherwise specified). Each individual fiber strand is numbered on the connector boot.
For manfacturing compliance and conformance information 
Click Here.
For a refence guide on testing and cleaaning fiber optics Click Here.
