RELATED PRODUCTS

For Fiber Optic Link Card housings and card shelves and rack mounts, see the Housings section
FIBER OPTIC LINK HOUSINGS

Single card Fiber Optic Link Units are available as pre-installed units, in indoor or outdoor rated housings, ready for installation.
SEE PRE-INSTALLED HOUSING UNITS

Our enclosures are also available as pre-wired Telco Interface Units. Visit the Telco Interface Unit page for additional information.
TELCO INTERFACE UNITS

AC/DC POWER SUPPLIES
SOLAR POWER SUPPLIES
POWER INSERTION DEVICES
CARD SHELVES WITH POWER SUPPLIES
INSTALLATION OPTIONS
DUAL CARD HOUSINGS
 4 CARD HOUSINGS
 MULTI CARD SHELVES
 RACK MOUNTS
 ALUMINUM CABINETS
 FIBERGLASS CABINETS
 PEDESTALS
T1 4x1 MUX SERIES
PRODUCT DESCRIPTION

The T1 Multiplexer (or Fiber Mux System) transports up to four T1 lines over two strands of fiber. The 4x1 card has B8ZS and AMI compatibility, and contains LED status indicators for convenient system monitoring.

The T1 4x1 Fiber Mux card can be installed into any Fiber Optic Link shelf or housing, providing high density T1 over fiber in a single card slot. The T1 4x1 Mux card is a cost effective solution for high capacity applications.
FEATURES
High density, cost effective solution
Four T1 lines over two strands of fiber
100 kHz to 10 MHz T-1
1.544 Mbps or CCIT 2.084 Mbps
Convenient LED Status monitoring
Dual power capable, line or 24-56VDC
Available in Single or Multi-mode
Available with ST or SC Connectors
Available with RJ-48C Jacks
Compatible with wide variety of housings*
Available pre-installed in housings
LIFETIME UNCONDITIONAL WARRANTY
*Note: Not compatible with single card indoor housing.
STANDARD SPECIFICATIONS
TRANSMISSION METHOD:
Frequency modulated light via two optical fibers
WAVELENGTH:
Multimode: 850nm
Single Mode: 1310nm
FIBER TYPE/DISTANCE:
Multimode (62.5/125µm): 1.5 miles/2.5km
Single-Mode (9/125µm): 9 miles/15km; Long Haul 37 miles/60km
FIBER CONNECTOR TYPE: ST or SC
PHYSICAL DIMENSIONS:
7in. x 4in. x 1in. (177.8mm x 101.6mm x 25.4mm)
(Standard RLH Fiber Card Form Factor)
OPERATING TEMPERATURE:
-40˚F to +158˚F (-40˚C to +70˚C)
OPERATING HUMIDITY:
95% non-condensing
STANDARD CO CARD


CO CARD WITH
OPTIONAL RJ-48 JACKS
CONNECTOR OPTIONS
RJ-48C network connectors are available as an option, or as an accessory kit for installing on existing T1 4x1 Mux cards.

POWER OPTIONS
CO (Central Office) and Sub (Subscriber side) cards can operate from either line power or local power input of 24-56VDC.

POWER SUPPLY OPTIONS
We carry an extensive line of AC/DC power supplies, converters, solar power and battery backup systems.
back to top
ORDERING INFORMATION
4x1 T1 Mux Card
Part Number
Description
8806-1345-01
T1 4x1 Mux CO Card
Line Powered or 24-56VDC Local Power
Fiber Type: Multimode
Connector Style: ST
8805-1345-01
T1 4x1 Mux CO Card
Line Powered or 24-56VDC Local Power
Fiber Type: Multimode
Connector Style: SC
8806-1385-01
T1 4x1 Mux CO Card
Line Powered or 24-56VDC Local Power
Fiber Type: Single-mode
Connector Style: ST
8805-1385-01
T1 4x1 Mux CO Card
Line Powered or 24-56VDC Local Power
Fiber Type: Single-mode
Connector Style: SC
8806-1355-01
T1 4x1 Mux Sub Card
Line Powered or 24-56VDC Local Power
Fiber Type: Multimode
Connector Style: ST
8805-1355-01
T1 4x1 Mux Sub Card
Line Powered or 24-56VDC Local Power
Fiber Type: Multimode
Connector Style: SC
8806-1395-01
T1 4x1 Mux Sub Card
Line Powered or 24-56VDC Local Power
Fiber Type: Single-mode
Connector Style: ST
8805-1395-01
T1 4x1 Mux Sub Card
Line Powered or 24-56VDC Local Power
Fiber Type: Single-mode
Connector Style: SC

back to top

ORDERING INFORMATION
4x1 T1 Mux Card with RJ-48C jacks
Part Number
Description
8806-1345-01RJ
T1 4x1 Mux CO Card with RJ-48C jacks
Line Powered or 24-56VDC Local Power
Fiber Type: Multimode
Connector Style: ST
8805-1345-01RJ
T1 4x1 Mux CO Card with RJ-48C jacks
Line Powered or 24-56VDC Local Power
Fiber Type: Multimode
Connector Style: SC
8806-1385-01RJ
T1 4x1 Mux CO Card with RJ-48C jacks
Line Powered or 24-56VDC Local Power
Fiber Type: Single-mode
Connector Style: ST
8805-1385-01RJ
T1 4x1 Mux CO Card with RJ-48C jacks
Line Powered or 24-56VDC Local Power
Fiber Type: Single-mode
Connector Style: SC
8806-1355-01RJ
T1 4x1 Mux Sub Card with RJ-48C jacks
Line Powered or 24-56VDC Local Power
Fiber Type: Multimode
Connector Style: ST
8805-1355-01RJ
T1 4x1 Mux Sub Card with RJ-48C jacks
Line Powered or 24-56VDC Local Power
Fiber Type: Multimode
Connector Style: SC
8806-1395-01RJ
T1 4x1 Mux Sub Card with RJ-48C jacks
Line Powered or 24-56VDC Local Power
Fiber Type: Single-mode
Connector Style: ST
8805-1395-01RJ
T1 4x1 Mux Sub Card with RJ-48C jacks
Line Powered or 24-56VDC Local Power
Fiber Type: Single-mode
Connector Style: SC

back to top

ORDERING INFORMATION
RJ-48C Adapters
Part Number
Description
RLH-RJ4X1-CO
Pack of 4 RJ-48C Adapters for CO T1 4x1 Mux Cards
Accessory Retrofit Kit
RLH-RJ4X1-SUB
Pack of 4 RJ-48C Adapters for SUB T1 4x1 Mux Cards
Accessory Retrofit Kit

back to top