HOUSINGS AND ENCLOSURES

FIBER OPTIC LINK HOUSINGS
This 4RU Plug-in card is designed to be used in a housing to protect and electrically isolate the card.

PRE-INSTALLED HOUSING UNITS
Single card Fiber Optic Link Units are available as pre-installed units, in indoor or outdoor rated housings, ready for installation.

TELCO INTERFACE UNITS
Our enclosures are also available as pre-wired Telco Interface Units. Visit the Telco Interface Unit page for additional information.

SINGLE CARD HOUSINGS
DUAL CARD HOUSINGS
4 CARD HOUSINGS
MINI INTERFACE ENCLOSURES
MULTI CARD SHELVES
RACK MOUNT ENCLOSURES
ALUMINUM CABINETS
FIBERGLASS CABINETS
PEDESTALS
RELATED PRODUCTS

ENCLOSURES
From heavy duty NEMA-4 rated aluminum cabinets to compact dielectric pedestals, we carry a wide variety of enclosures.

FIBER OPTIC CABLE
Need fiber? We can supply you the just the right fiber cable for your application.

AC/DC POWER SUPPLIES
SOLAR POWER SUPPLIES
POWER INSERTION DEVICES
CARD SHELVES WITH POWER SUPPLIES
4 Wire Data E&M (Contact Closure) 4RU Plug-in Card
DESCRIPTION

The 4RU Fiber Optic Link 4-wire E&M system provides simultaneous transmission of 4-wire data and single or bidirectional E&M over two optical fibers, providing point-to-point isolation of Telco or 4-wire PABX trunk lines using E&M leads.

The 4-wire data supports full duplex constant transmission up to 9600 bps in voice frequency range (300Hz-3.4KHz). The E&M card interfaces with an E&M input and provides a contact closure on the far end. The cards have convenient E&M input and output status LED indicators.

E&M cards may also be ordered with SM11 for dry contact closure input.

This system is environmentally hardened and is designed to fit into any of our 4RU card shelves and housings and is covered by our exclusive unconditional lifetime warranty.

This card is designed to be installed into a 4RU card housing.
See housings Here.
FEATURES
EXCLUSIVE UNCONDITIONAL LIFETIME WARRANTY
4 Wire data with E&M function
Full duplex, constant transmission
Dual power capable, line or 24-56VDC
Available in Single or Multi-mode
Available with ST or SC Connectors
Compatible with wide variety of housings
Available pre-installed in housings
STANDARD SPECIFICATIONS
TRANSMISSION METHOD:
Frequency modulated light via two optical fibers
WAVELENGTH:
Multimode: 850nm
Single Mode: 1310nm
FIBER TYPE/DISTANCE:
Multimode (62.5/125µm): 1.2 miles/2km
Single-Mode (9/125µm): 9 miles/15km; Long Haul 31 miles/50km
FIBER CONNECTOR TYPE: ST or SC
PHYSICAL DIMENSIONS:
7in. x 4in. x 1in. (177.8mm x 101.6mm x 25.4mm)
(Standard RLH Fiber Card Form Factor)
OPERATING TEMPERATURE:
-40˚F to +158˚F (-40˚C to +70˚C)
OPERATING HUMIDITY:
95% non-condensing
4W DATA E&M CARD
POWER OPTIONS

CO (Central Office) and Sub (Subscriber side) cards can operate from either line power or local power input of 24-56VDC.

POWER SUPPLY OPTIONS
We carry an extensive line of AC/DC power supplies, DC/DC converters, solar power and battery backup systems for these cards.
COMPLIANCE

The RLH 2W Analog Phone Fiber Optic Link System is compliant with the following industry standards:

  • FCC PART-68B
  • IEEE-80 IEEE-367
  • IEEE-487
  • IEEE-1590
  • IEEE-1615
  • Motorola R56
  • BR 876-310-100 BT (Telcordia)
  • Bellcore SR-3966
  • GR-1089
  • GR-63

back to top

ORDERING INFORMATION
RLH 4RU ISDN/BRI Fiber Optic Link Card
Part Number
Description
8806-1238-02

Verizon PN: 429240
4 Wire Data E&M CO 4RU Plug-in Card
Powering
 Line Powered or 24~56VDC Local Power
Fiber Type / Connector:
 Multimode ST *
Range:
 1.2 miles (2km)
8806-1248-02

Verizon PN: 429242
4 Wire Data E&M Sub 4RU Plug-in Card
Powering
 Line Powered or 24~56VDC Local Power
Fiber Type / Connector:
 Multimode ST *
Range:
 1.2 miles (2km)
8805-1238-02
4 Wire Data E&M CO 4RU Plug-in Card
Powering
 Line Powered or 24~56VDC Local Power
Fiber Type / Connector:
 Multimode SC *
Range:
 1.2 miles (2km)
8805-1248-02
4 Wire Data E&M Sub 4RU Plug-in Card
Powering
 Line Powered or 24~56VDC Local Power
Fiber Type / Connector:
 Multimode SC *
Range:
 1.2 miles (2km)
8806-1277-01
4 Wire Data E&M CO 4RU Plug-in Card
Powering
 Line Powered or 24~56VDC Local Power
Fiber Type / Connector:
 Single Mode ST
Range:
 9 miles (15km)
8806-1287-01
4 Wire Data E&M Sub 4RU Plug-in Card
Powering
 Line Powered or 24~56VDC Local Power
Fiber Type / Connector:
 Single Mode ST
Range:
 9 miles (15km)
8806-1277-01LH
4 Wire Data E&M CO 4RU Plug-in Card
Powering
 Line Powered or 24~56VDC Local Power
Fiber Type / Connector:
 Single Mode ST (Long Haul)
Range:
 31 mi. (50 km)
8806-1287-01LH
4 Wire Data E&M Sub 4RU Plug-in Card
Powering
 Line Powered or 24~56VDC Local Power
Fiber Type / Connector:
 Single Mode ST (Long Haul)
Range:
 31 mi. (50 km)
8805-1277-01
4 Wire Data E&M CO 4RU Plug-in Card
Powering
 Line Powered or 24~56VDC Local Power
Fiber Type / Connector:
 Single Mode SC
Range:
 9 miles (15km)
8805-1287-01
4 Wire Data E&M Sub 4RU Plug-in Card
Powering
 Line Powered or 24~56VDC Local Power
Fiber Type / Connector:
 Single Mode SC
Range:
 9 miles (15km)
  • * 62.5um multimode fiber compatibility is standard, add -50 to part number for 50um fiber compatibility
  • Add -RJ to part number for preinstalled RJ48S adapter.
  • Add -S to part number for simplex current output option on Sub card only.
  • Add -SM11 to card p/n for dry contact closure E&M input.
  • A complete system requires a FXO/CO card and a FXS/Sub Card.
  • Please contact your RLH sales representative for pricing and delivery information.

back to top