INSTALLATION OPTIONS
RELATED PRODUCTS

ENCLOSURES
From heavy duty NEMA-4 rated aluminum cabinets to compact dielectric pedestals, we carry a wide variety of enclosures.

FIBER OPTIC CABLE
Need fiber? We can supply you the just the right fiber cable for your application.

FIBER OPTIC LINK HOUSINGS
For Fiber Optic Link Card housings and card shelves and rack mounts, see the Housings section

PRE-INSTALLED HOUSING UNITS
Single card Fiber Optic Link Units are available as pre-installed units, in indoor or outdoor rated housings, ready for installation.

TELCO INTERFACE UNITS
Our enclosures are also available as pre-wired Telco Interface Units. Visit the Telco Interface Unit page for additional information.
4 Wire 9.6 Kbps DDS System
PRODUCT DESCRIPTION

RLH Fiber Optic Link 9.6 kbps Cards are designed to process incoming bipolar signals (3.2V P-P Max) with a digital data signal rates from 4.8 to 9.6kpbs. It also supports analog data with a bandwidth of 50 kHz to 500 Hz at a maximum of 9.6 kbps. An electrical copper signal is converted into an optical signal and transmitted over 2 strands of fiber optic cable.

The CO Card will operate from a 24~54VDC at a minimum of 18mA sealing current on the send and receive Telco pairs. The CO Card can also be local powered by an isolated power source (24-54VDC).

The 9.6 kbps Sub Card is typically powered by a 24~54VDC, 18mA local source. It may also be powered by simplexed current on the send and receive pairs from the subscriber equipment.
FEATURES
4 Wire 9.6 kbps DDS
500 Hz to 50 kHz bandwidth
2.4 kbps to 9.6 kbps data rate
Environmentally hardened, superior operating temperature range
Available in Single or Multi-mode
Dual power capable, line or 24-56VDC local power
Available in Single or Multi-mode
Available with ST or SC Connectors
Compatible with wide variety of housings
Available pre-installed in housings
EXCLUSIVE LIFETIME UNCONDITIONAL WARRANTY
STANDARD SPECIFICATIONS
TRANSMISSION METHOD:
Frequency modulated light via two optical fibers
WAVELENGTH:
Multimode: 850nm
Single Mode: 1310nm
FIBER TYPE/DISTANCE:
Multimode (62.5/125µm, 50/125µm): 1.2 miles/2km
Single-Mode (9/125µm): 9 miles/15km; Long Haul 31 miles/50km
FIBER CONNECTOR TYPE: ST or SC
PHYSICAL DIMENSIONS:
7in. x 4in. x 1in. (177.8mm x 101.6mm x 25.4mm)
(Standard RLH 4RU Plug-in Card Form Factor)
OPERATING TEMPERATURE:
-40˚F to +158˚F (-40˚C to +70˚C)
OPERATING HUMIDITY:
95% non-condensing

CO CARD
SUB CARD
POWER OPTIONS

CO (Central Office) cards can operate from either line power or local power input of 24-56VDC.

Sub (Subscriber side) cards require a local power input of 24-56VDC.

POWER SUPPLY OPTIONS
We carry an extensive line of AC/DC power supplies, DC/DC converters, solar power and battery backup systems for these cards.

back to top

ORDERING INFORMATION
4 Wire 9.6 Kbps DDS Fiber Optic Link System
Part Number
Description
8806-1313-01

Verizon PN: 429279
4 Wire 9.6 Kbps CO Card
Line Powered or 24-56VDC Local Power
Fiber Type: Multimode
Connector Style: ST
8805-1313-01
4 Wire 9.6 Kbps CO Card
Line Powered or 24-56VDC Local Power
Fiber Type: Multimode
Connector Style: SC
8806-1343-01
4 Wire 9.6 Kbps CO Card
Line Powered or 24-56VDC Local Power
Fiber Type: Single-mode
Connector Style: ST
8806-1343-01LH
4 Wire 9.6 Kbps CO Card
Line Powered or 24-56VDC Local Power
Fiber Type: Single-mode (Long Haul)
Connector Style: ST
8805-1343-01
4 Wire 9.6 Kbps CO Card
Line Powered or 24-56VDC Local Power
Fiber Type: Single-mode
Connector Style: SC
8806-1323-01

Verizon PN: 429280
4 Wire 9.6 Kbps Sub Card
Line Powered or 24-56VDC Local Power
Fiber Type: Multimode
Connector Style: ST
8805-1323-01
4 Wire 9.6 Kbps Sub Card
Line Powered or 24-56VDC Local Power
Fiber Type: Multimode
Connector Style: SC
8806-1353-01
4 Wire 9.6 Kbps Sub Card
Line Powered or 24-56VDC Local Power
Fiber Type: Single-mode
Connector Style: ST
8806-1353-01LH
4 Wire 9.6 Kbps Sub Card
Line Powered or 24-56VDC Local Power
Fiber Type: Single-mode (Long Haul)
Connector Style: ST
8805-1353-01
4 Wire 9.6 Kbps Sub Card
Line Powered or 24-56VDC Local Power
Fiber Type: Single-mode
Connector Style: SC