HOUSINGS AND ENCLOSURES

FIBER OPTIC LINK HOUSINGS
This 4RU Plug-in card is designed to be used in a housing to protect and electrically isolate the card.

PRE-INSTALLED HOUSING UNITS
Single card Fiber Optic Link Units are available as pre-installed units, in indoor or outdoor rated housings, ready for installation.

TELCO INTERFACE UNITS
Our enclosures are also available as pre-wired Telco Interface Units. Visit the Telco Interface Unit page for additional information.

SINGLE CARD HOUSINGS
DUAL CARD HOUSINGS
4 CARD HOUSINGS
MINI INTERFACE ENCLOSURES
MULTI CARD SHELVES
RACK MOUNT ENCLOSURES
ALUMINUM CABINETS
FIBERGLASS CABINETS
PEDESTALS
RELATED PRODUCTS

ENCLOSURES
From heavy duty NEMA-4 rated aluminum cabinets to compact dielectric pedestals, we carry a wide variety of enclosures.

FIBER OPTIC CABLE
Need fiber? We can supply you the just the right fiber cable for your application.

AC/DC POWER SUPPLIES
SOLAR POWER SUPPLIES
POWER INSERTION DEVICES
CARD SHELVES WITH POWER SUPPLIES
2 Wire ISDN/BRI 4RU Plug-in Card
DESCRIPTION

The RLH 4RU ISDN/BRI Fiber Optic Link system transmits a 2-wire Basic Rate Interface (BRI) ISDN line over multimode or single mode fiber optic cable. ISDN signals are sensed and recreated at both ends conforming to 2B1Q formats. A CO and a Sub card are required for a complete system.

Fiber optic cable is immune to EMI/RF interference, ground loops, and high voltage surges from lightning or ground faults, and is ideal in electrically noisy environments such as near large power sources, electrical motors, and radio communications equipment. By utilizing fiber optic cable, the 2 wire ISDN/BRI card provides absolute electrical isolation between both ends of the network.

This system is environmentally hardened and requires a local 24~56VDC power source. It is designed to fit into any of our 4RU card shelves and housings and is covered by our exclusive unconditional lifetime warranty.

This card is designed to be installed into a 4RU card housing.
See housings Here.
FEATURES
2 Wire ISDN BRI repeater
Conforms to 2B1Q format
Utilizes 24-56VDC power source
Available in Single and Multi-mode
Available with ST or SC Connectors
Compatible with wide variety of housings
Available pre-installed in housings
EXCLUSIVE UNCONDITIONAL LIFETIME WARRANTY
STANDARD SPECIFICATIONS
TRANSMISSION METHOD:
Frequency modulated light via two optical fibers
WAVELENGTH:
Multimode: 850nm
Single Mode: 1310nm
FIBER TYPE/DISTANCE:
Multimode (62.5/125µm): 1.2 miles/2km
Single-Mode (9/125µm): 9 miles/15km
FIBER CONNECTOR TYPE: ST or SC
PHYSICAL DIMENSIONS:
7in. x 4in. x 1in. (177.8mm x 101.6mm x 25.4mm)
(Standard RLH Fiber Card Form Factor)
OPERATING TEMPERATURE:
-40˚F to +158˚F (-40˚C to +70˚C)
OPERATING HUMIDITY:
95% non-condensing
ISDN/BRI 4RU CARD
POWER OPTIONS

CO (Central Office) and Sub (Subscriber side) cards can operate from either line power or local power input of 24-56VDC.

POWER SUPPLY OPTIONS
We carry an extensive line of AC/DC power supplies, DC/DC converters, solar power and battery backup systems for these cards.
COMPLIANCE

The RLH 2W ISDN/BRI Fiber Optic Link System is compliant with the following industry standards:

  • FCC PART-68B
  • IEEE-80 IEEE-367
  • IEEE-487
  • IEEE-1590
  • IEEE-1615
  • Motorola R56
  • BR 876-310-100 BT (Telcordia)
  • Bellcore SR-3966
  • GR-1089
  • GR-63

back to top

ORDERING INFORMATION
RLH 2W ISDN/BRI Fiber Optic Link 4RU Plug-in Card
Part Number
Description
8806-1387-01
2 Wire ISDN/BRI 4RU CO Card
Powering
 Line Powered
Fiber Type / Connector:
 Multimode ST *
Range:
 1.5 miles (2.5km)
8806-1397-01
2 Wire ISDN/BRI 4RU Sub Card
Powering
 Local 24~56VDC Power
Fiber Type / Connector:
 Multimode ST *
Range:
 1.5 miles (2.5km)
8805-1387-01
2 Wire Analog Phone 4RU FXO/CO Card
Powering
 Line Powered
Fiber Type / Connector:
 Multimode SC *
Range:
 1.5 miles (2.5km)
8805-1397-01
2 Wire Analog Phone 4RU FXS/Sub Card
Powering
 Local 24~56VDC Power
Fiber Type / Connector:
 Multimode SC *
Range:
 1.5 miles (2.5km)
8806-1388-01
2 Wire Analog Phone 4RU FXO/CO Card
Powering
 Line Powered
Fiber Type / Connector:
 Single Mode ST
Range:
 9 miles (15km)
8806-1398-01
2 Wire Analog Phone 4RU FXS/Sub Card
Powering
 Local 24~56VDC Power
Fiber Type / Connector:
 Single Mode ST
Range:
 9 miles (15km)
8805-1388-01
2 Wire Analog Phone 4RU FXO/CO Card
Powering
 Line Powered
Fiber Type / Connector:
 Single Mode SC
Range:
 9 miles (15km)
8805-1398-01
2 Wire Analog Phone 4RU FXS/Sub Card
Powering
 Local 24~56VDC Power
Fiber Type / Connector:
 Single Mode SC
Range:
 9 miles (15km)
  • * 62.5um multimode fiber compatibility is standard, add -50 to part number for 50um fiber compatibility.
  • Add -RJ to part number for preinstalled RJ11 adapter.
  • Add -S to part number for simplex current output option on Sub card only.
  • A complete system requires a FXO/CO card and a FXS/Sub Card.
  • Please contact your RLH sales representative for pricing and delivery information.