RLH Industries, Inc. manufactures fiber optic cable assemblies. Fiber optic cables assemblies can easily be installed with little or no fiber experience. Pre-terminated fiber provides a convenient and cost effective engineering solution. Fiber optic strand counts from 2 to 288 can be pre-terminated.

Note: Strand counts higher than 96 are at risk of damage during installation and should be field terminated after cable is installed.

RLH cable assemblies include a pulling sheath installed on one or both ends of the cable. The pulling sheath protects the terminated ends during installation. The pulling sheath has a Kevlar pulling eye and is rated at 600 lbs. Recommended conduit size is 2-4 inches.

When measuring the length of the fiber path it is recommended to add 20-50 feet of slack for maintenance. Cable slack can usually be stored in a pull box or hand hole. RLH breakout kits come with standard 3 feet of 3mm buffer tubing (unless otherwise specified). Each individual fiber strand is numbered on the connector boot.

AVAILABLE FIBER OPTIC CABLE ADSS AERIAL LOOSE TUBE INDOOR/OUTDOOR DISTRIBUTION (RISER OR PLENUM)

FEATURES Pre-terminated fiber optic strand counts from 2 to 144 Kevlar pulling sheaths over terminated ends Individually numbered strands ST or SC connectors Multimode or Single-Mode ST, SC, SMA, FC or LC connectors ADSS, Loose Tube or Distribution Fiber Cable Sized to any length

SEE FULL DATA SHEET

RELATED PRODUCTS AND ACCESSORIES RLH carries commonly used fiber optic installation accessories and equipment. From hybrid fiber cable adapters, to aerial ADSS installation brackets and supports, fiber optic cable markers and locators, ducts and pull boxes. Refer to the following sections for more product information: FIBER PATCH PANELS FIBER PATCH/SPLICE ENCLOSURES FIBER ADAPTERS COUPLERS/SPLITTERS AERIAL INSTALLATION HARDWARE FIBER MARKERS DUCTS AND GRADE BOXES

SEE ORDERING CHART