RELATED PRODUCTS

FIBER OPTIC LINK HOUSINGS
For Fiber Optic Link Card housings and card shelves and rack mounts, see the Housings section

PRE-INSTALLED HOUSING UNITS
Single card Fiber Optic Link Units are available as pre-installed units, in indoor or outdoor rated housings, ready for installation.

TELCO INTERFACE UNITS
Our enclosures are also available as pre-wired Telco Interface Units. Visit the Telco Interface Unit page for additional information.

HDSL1 Adtran® SYSTEM
DESCRIPTION

The 2-Pair HDSL1 Adtran Fiber Optic Link CO Card interfaces with a standard Adtran HTU-C units from the Central Office. The HDSL1 Adtran Sub Card interfaces a standard Adtran HTU-R unit.

The CO and Sub HDSL1 Cards can be remotely tested. Remote loopback testing can be performed through HDSL1 System using in-band codes.

CO CARD
SUB CARD
SEE FULL DATA SHEET
STANDARD SPECIFICATIONS
TRANSMISSION METHOD:
Frequency modulated light via two optical fibers
WAVELENGTH:
Multimode: 850nm
Single Mode: 1310nm
FIBER TYPE/DISTANCE:
Multimode (62.5/125µm): 3 miles/4.9km
Single-Mode (9/125µm): 8 miles/13km
FIBER CONNECTOR TYPE: ST or SC
PHYSICAL DIMENSIONS:
7in. x 4in. x 1in. (177.8mm x 101.6mm x 25.4mm)
(Standard RLH Fiber Card Form Factor)
OPERATING TEMPERATURE:
-40˚F to +158˚F (-40˚C to +70˚C)
OPERATING HUMIDITY:
95% non-condensing
FEATURES
Compatible with 2-Pair Adtran® Units
Can utilize Line or 24-130VDC power
Available in Single and Multi-mode
Available with ST or SC Connectors
Compatible with wide variety of housings
Available pre-installed into housing
LIFETIME UNCONDITIONAL WARRANTY

HOUSINGS AND ENCLOSURES

This Fiber Optic Link is designed to be used in a housing designed to protect and electrically isolate the card.

SINGLE CARD HOUSINGS
DUAL CARD HOUSINGS
4 CARD HOUSINGS
MINI INTERFACE ENCLOSURES
MULTI CARD SHELVES
RACK MOUNT ENCLOSURES
ALUMINUM CABINETS
FIBERGLASS CABINETS
PEDESTALS

POWER SUPPLY OPTIONS

CO (Central Office) and Sub (Subscriber Side) cards can operate from telephone line power (simplex current), eliminating the need for a local power source. Cards can also utilize local power input of 24-130VDC.

Remote power supply options including simple line powered units, integrated enclosure units, High-Density rack mount units, battery backup UPS versions, converters and Solar Power options.

ORDERING INFORMATION
HDSL1 Adtran® Fiber Optic Link Card
Part Number
Description
8806-1339-01

Verizon PN: 87288281
CLEI: NPIFCL01AA

2-Pair HDSL1 Adtran® CO Card
Line Power or 24-130VDC Remote Power
Fiber Type: Multimode
Connector Style: ST
8805-1339-01
2-Pair HDSL1 Adtran® CO Card
Line Power or 24-130VDC Remote Power
Fiber Type: Multimode
Connector Style: SC
8806-1340-01
2-Pair HDSL1 Adtran® CO Card
Line Power or 24-130VDC Remote Power
Fiber Type: Single-mode
Connector Style: ST
8805-1340-01
2-Pair HDSL1 Adtran® CO Card
Line Power or 24-130VDC Remote Power
Fiber Type: Single-mode
Connector Style: SC
8806-1349-01

Verizon PN: 87288282
CLEI: NPIFDK01AA

2-Pair HDSL1 Adtran® Sub Card
Line Power or 24-130VDC Remote Power
Fiber Type: Multimode
Connector Style: ST
8805-1349-01
2-Pair HDSL1 Adtran® Sub Card
Line Power or 24-130VDC Remote Power
Fiber Type: Multimode
Connector Style: SC
8806-1350-01
2-Pair HDSL1 Adtran® Sub Card
Line Power or 24-130VDC Remote Power
Fiber Type: Single-mode
Connector Style: ST
8805-1350-01
2-Pair HDSL1 Adtran® Sub Card
Line Power or 24-130VDC Remote Power
Fiber Type: Single-mode
Connector Style: SC