INSTALLATION OPTIONS
RELATED PRODUCTS

ENCLOSURES
From heavy duty NEMA-4 rated aluminum cabinets to compact dielectric pedestals, we carry a wide variety of enclosures.

FIBER OPTIC CABLE
Need fiber? We can supply you the just the right fiber cable for your application.

FIBER OPTIC LINK HOUSINGS
For Fiber Optic Link Card housings and card shelves and rack mounts, see the Housings section

PRE-INSTALLED HOUSING UNITS
Single card Fiber Optic Link Units are available as pre-installed units, in indoor or outdoor rated housings, ready for installation.

TELCO INTERFACE UNITS
Our enclosures are also available as pre-wired Telco Interface Units. Visit the Telco Interface Unit page for additional information.
56k up to Frame Relay 64k DDS Total Reach® Compatible Interface Cards
PRODUCT DESCRIPTION

The Frame Relay 64 Kbps DDS Total Reach® compatible Fiber Optic Link cards (CO and Sub) process incoming bipolar signals within a bandwidth of 1 kHz to 300 kHz at a data rate range of 19.2 kbps to 64 Kbps. This is an excellent fit for 56kbps systems, and compatible down to 19.2kbps.

For use with Adtran® or Westell® products, refer to the data sheet or the application notes below.
FEATURES
19.2 kbps to 64 kbps data rate
4 Wire Frame Relay 64 Kbps DDS
Adtran® Total Reach® and Westell® compatible
Environmentally hardened, superior operating temperature range
1 kHz to 300 kHz bandwidth
Dual power capable, line or 24-56VDC
Available in Single or Multi-mode
Available with ST or SC Connectors
Compatible with wide variety of housings
Available pre-installed in housings
LIFETIME UNCONDITIONAL WARRANTY
STANDARD SPECIFICATIONS
TRANSMISSION METHOD:
Frequency modulated light via two optical fibers
WAVELENGTH:
Multimode: 850nm
Single Mode: 1310nm
FIBER TYPE/DISTANCE:
Multimode (62.5/125µm): 1.8 miles/3km
Single-Mode (9/125µm): 8 miles/13km; Long Haul 37 miles/60km
FIBER CONNECTOR TYPE: ST or SC
PHYSICAL DIMENSIONS:
7in. x 4in. x 1in. (177.8mm x 101.6mm x 25.4mm)
(Standard RLH Fiber Card Form Factor)
OPERATING TEMPERATURE:
-40˚F to +158˚F (-40˚C to +70˚C)
OPERATING HUMIDITY:
95% non-condensing

CO CARD
SUB CARD
POWER OPTIONS

CO (Central Office) cards can operate from either line power or local power input of 24-56VDC.

Sub (Subscriber side) cards require a local power input of 24-56VDC.

POWER SUPPLY OPTIONS
We carry an extensive line of AC/DC power supplies, DC/DC converters, solar power and battery backup systems for these cards.
System Diagram


LARGER PICTURE
APPLICATION NOTES:

The RLH Frame Relay 64 kbps Sub card will pass sealing current to power the Westell® 56kbps DDI 5740l3 200 Mechanics Remote Module/NIU. The Part# is DDI5740I3, CLEI# NCC1MFN4AA, Description: Digital Data Interface Module with Line Powering.

The Fiber Optic Link Frame Relay 64 kbps system is compatible with the Adtran® Total Reach® 2-wire system, by using the Adtran remote unit part new part number: 1292023L5 CLEI# D4OIKXU8AA . The obsolete part number is 1292021L5. The List 5 remote unit will pass through sealing current to power the Fiber Optic Link Frame Relay CO Card. The Sealing Current Switch on the CO Card must be in the OFF position.
System Diagram

LARGER PICTURE

back to top

ORDERING INFORMATION
Frame Relay 64 kbps DDS Fiber Optic Link System
Part Number
Description
8806-1314-01

Verizon PN: 429288
CLEI: NPIFCH01AA
Frame Relay 64 kbps DDS CO Card
Line Powered or 24-56VDC Local Power
Fiber Type: Multimode
Connector Style: ST
8805-1314-01
Frame Relay 64 kbps DDS CO Card
Line Powered or 24-56VDC Local Power
Fiber Type: Multimode
Connector Style: SC
8806-1318-01

Verizon PN: 11023063
CLEI: NPIFCE01AA
Frame Relay 64 kbps DDS CO Card
Line Powered or 24-56VDC Local Power
Fiber Type: Single-mode
Connector Style: ST
8806-1318-01LH
Frame Relay 64 kbps DDS CO Card
Line Powered or 24-56VDC Local Power
Fiber Type: Single-mode (Long Haul)
Connector Style: ST
8805-1318-01
Frame Relay 64 kbps DDS CO Card
Line Powered or 24-56VDC Local Power
Fiber Type: Single-mode
Connector Style: SC
8806-1324-01

Verizon PN: 429298
CLEI: NPIFDH01AA
Frame Relay 64 kbps DDS Sub Card
24-56VDC Local Power
Fiber Type: Multimode
Connector Style: ST
8805-1324-01
Frame Relay 64 kbps DDS Sub Card
24-56VDC Local Power
Fiber Type: Multimode
Connector Style: SC
8806-1328-01

Verizon PN: 11023062
CLEI: NPIFDE01AA
Frame Relay 64 kbps DDS Sub Card
24-56VDC Local Power
Fiber Type: Single-mode
Connector Style: ST
8806-1328-01LH
Frame Relay 64 kbps DDS Sub Card
24-56VDC Local Power
Fiber Type: Single-mode (Long Haul)
Connector Style: ST
8805-1328-01
Frame Relay 64 kbps DDS Sub Card
24-56VDC Local Power
Fiber Type: Single-mode
Connector Style: SC