DESCRIPTION
The RLH DS3 Fiber Converter T3/E3 converts standard T3 (44.736Mbps) or E3 (34.368Mbps) coax to fiber conversion, and can be used by telco service providers and enterprise level users to connect to communication devices such as Utility, Wireless, PBX, Multiplexers, Routers and video servers via fiber optic cable.
The T3/E3 system operates in pairs, extending distances over fiber, improving noise immunity and quality of service while improving intrusion protection, high voltage communications protection and network security.
| FEATURES |
|
 |
Critical DS3 environments such as Wireless, Utility and Military applications |
|
|
Full duplex, constant transmission |
|
|
Dual power capable, line or 24-56VDC |
|
|
T3 (DS3) or E3 coax fiber converter |
|
|
Framing independent - supports framed or unframed and channelized or fractional unchannelized data |
|
|
Supports B3ZS for T3 (DS3) and HDB3 for E3 codes |
|
|
Supports dual-fiber and single-fiber with distances of up to 120km and 40km respectively |
|
|
Supports multimode and single-mode fiber with ST, SC, LC and MT-RJ connectors |
|
|
Features user-selectable Local and Remote Loop-Back modes and Force 1’s (AIS) to Coax and Fiber |
|
|
Individual coax and fiber port enable/disable |
|
|
Can be unmanaged or managed using a Network Management Module (NMM) |
|
|
LED displays for immediate visual status of each port |
|
|
Meets ANSI, ETSI and ITU specifications |
|
|
Environmentally Rated for weather conditions |
|
|
Compatible with wide variety of housings |
|
|
Available pre-installed in housings |
|
|
LIFETIME UNCONDITIONAL WARRANTY |
|
|
|
|
|
| STANDARD SPECIFICATIONS |
|
TRANSMISSION METHOD:
Frequency modulated light via optical fibers
|
|
WAVELENGTH:
Multimode: 1300nm
Single Mode/Long Haul: 1310nm
|
|
FIBER TYPE/DISTANCE:
Multimode (62.5/125µm): 3 miles/5km
Single-Mode (9/125µm): 18 miles/30km
Long Haul (9/125µm): 37 miles/60km
|
|
COAX TYPE/DISTANCE:
RG-59 75Ohm short-haul: 225ft/68.5m
RG-59 75Ohm long-haul (T3): 1245ft/380m
RG-59 75Ohm long-haul (E3): 1445ft/440m
|
| FIBER CONNECTOR TYPE: ST, SC, LC, MT-RJ |
PROTOCOLS:
ANSI: T1.102, T1.107, T1.403, T1.404, T1-404a (T3), T1-408
ITU: G.703 (E3), G.704, G.706, G.751, G.921, G.926, O.151
ETSI: EN 300 689, 300 686, 300 687 |
|
PHYSICAL DIMENSIONS:
7in. x 4in. x 1in. (177.8mm x 101.6mm x 25.4mm)
(Standard RLH Fiber Card Form Factor)
|
|
OPERATING TEMPERATURE:
-40˚F to +140˚F (-40˚C to +60˚C)
|
|
OPERATING HUMIDITY:
95% non-condensing
|
|
ENCLOSURES
